I9505XXUENAA Android 4.3 Jelly Bean Firmware Last Updated on 1-Mar-2014. Download and install the latest XXUENAA 4.3 Jelly Bean Firmware on Samsung Galaxy S4 GT-I9505 (Snapdragon) Smartphone. Samsung recently started rolling out an OTA update about the firmware. The latest firmware build version is I9505XXUENAA and is released for several countries. The Samsung GT-I9505 was released with Android 4.2.2 Jelly Bean and receiving Android 4.3 Jelly Bean from the month of October 2013. We have already covered many official firmware update for the device and here we have the latest available firmware for the device. If you own the device and not yet updated this latest firmware, then update the same using our simple tutorial below. The below guide will help you to download and flash the I9505XXUENAA Android 4.3 Jelly Bean Firmware manually through Odin.
If your Galaxy S4 I9505 already running on the Android 4.3 Jelly Bean, then you can only expect few bug fixes and performance enhancement with this latest firmware update. So, want to update your Galaxy S4 I9505 to the latest XXUENAA Android 4.3 Jelly Bean firmware? To install in official way, either you can go for
OTA (over the air) from Settings-About Phone-Software Update or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.3 XXUENAA firmware on your Galaxy S4 I9505 through Odin.
Also Check: Samsung Galaxy S4 GT-I9505 Full Specifications and Features
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.3 I9505XXUENAA official firmware on Galaxy S4 I9505.
add2
Also Check: Samsung Galaxy S4 GT-I9505 Full Specifications and Features
Important Note:
"The firmware is released only for the Samsung Galaxy S4 GT-I9505 model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone".
Android 4.3 Jelly Bean I9505XXUENAA Official Firmware Download List
Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy S4 GT-I9505 model.
Portugal (TPH): I9505XXUENAA_I9505YXXENA7_TPH.zip
Portugal (TPH): I9505XXUENAA_I9505YXXENA7_TPH.zip
[Firmware for rest of the countries and carrier will be added here when available]
Pre-Requisites:
- Check battery percentage, your device should have at least 60% battery power
- Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
- Backup important data and settings to external storage- follow this guide
- Install USB driver for your device on your computer- Download Samsung USB Driver
Points to be noted:
- If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
- Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
- After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
How to Install Android 4.3 Jelly Bean Official Firmware on Galaxy S4 I9505 through Odin:
- Download Android 4.3 XXUENAA Firmware for Galaxy S4 I9505 from the above list
- Download Odin
- Switch off your phone and boot Galaxy S4 I9505 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
- Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
- Now connect your Galaxy S4 I9505 to your computer via USB cable
- In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
- Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
- Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
- In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: I9505XXDLJ5_I9505ODDDLI7_INU.tar.md5)
- Now, click on the Start button to begin the installation process, wait few moments.
- Once completed, you would see “PASS!” message in ID:COM port having green background
- Your phone should automatically reboot after completion
- You can now disconnect your phone from computer
- Finish
Congratulations! your Galaxy S4 I9505 is now updated to the latest and official Android 4.3 Jelly Bean firmware. Hope you successfully completed the installation guide. If you followed everything as mentioned in the above tutorial, then your your Galaxy S4 should now running on the latest Android 4.3 Jelly Bean build version XXUENAA. You can confirm the firmware update details from Settings-About Phone. You can contact with us using the comment form below, if you find any problem with the above tutorial and download link and also share your experience with us.
0 comments:
Post a Comment