A simple method to root I747MVLUFNE6 Android 4.4.2 KitKat Firmware is now available at NasirTech. Samsung Galaxy S3 SGH-I747M recently get updated to the I747MVLUFNE6 4.4.2 KitKat Firmware. If you yet to update the firmware, then update the same by following this link- I747MVLUFNE6 Android 4.4.2 KitKat Firmware for Galaxy S3 SGH-I747M- How to Install. Hope you updated this latest firmware on your device and now you can root the same using our simple tutorial below. The below guide will help you to root VLUFNE6 4.4.2 KitKat Firmware running on Galaxy S3 SGH-I747M. Continue reading the tutorial for complete guide.
After updating official firmware, your device no longer belongs to rooted device. So, after official firmware update, many of us prefer to root our device to enjoy
some additional features that unrooted android device doesn't offer. With a
rooted android device, you can install apps that ask root permission, flash
various custom ROMs, install MODs and tweak various features. Root removes
default bloatware apps that free-up lots of memory space and extend the battery
life. However, once rooted, manufacturer warranty will be void. But you can regain the warranty by following proper unroot process. To know more about benefits of rooting android device, read- Complete Note on What is Rooting and
Benefits of Rooting Android Phone.
So,
want to root Galaxy S3 SGH-I747M Running I747MVLUFNE6 4.4.2 KitKat Firmware? Continue reading this page to get all the
necessary steps to successfully root your device. The root file (CF-Auto-Root)
we used in this tutorial is safe and have nearly 100% success rate. We'll use
Odin software to flash the root file.
Also Check: Samsung Galaxy S3 SGH-I747M Full Specifications and Features
The tutorial is made with simple step by step guide, so that even an android newbie user can follow and successfully root his/her device. However, in this process you may loss your personal data and settings. So, we recommend you to follow all the backup instructions before proceed to rooting guide.
add2
Also Check: Samsung Galaxy S3 SGH-I747M Full Specifications and Features
The tutorial is made with simple step by step guide, so that even an android newbie user can follow and successfully root his/her device. However, in this process you may loss your personal data and settings. So, we recommend you to follow all the backup instructions before proceed to rooting guide.
Warning!
- This rooting tutorial is only applicable for Samsung Galaxy S3 SGH-I747M model (d2can). So, don't try this in any other android device. Check your device model number from- Settings-About Phone.
- Rooting voids your phone's manufacturer warranty. However, you can get back the warranty anytime by following proper unroot process or by flashing official firmware.
- This guide is for educational purpose and you should try this at your own risk. We are not responsible if your device experience a soft brick after following this tutorial.
Pre-Requisites:
- Check battery percentage, charge your device to a decent level of at least 60% battery power. Your device should not turn off during installation.
- Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
- Backup important data and settings to external storage- follow this guide
- Install USB driver for your device on your computer- Download Samsung USB Driver
All the above pre-requisites are very important and must be followed before proceed to installation guide. Hope you get all the above points and done as mentioned. Now, you are ready to move to the final step of this tutorial where we have arranged a step by step details guide to root Galaxy S3 SGH-I747M running I747MVLUFNE6 4.4.2 KitKat firmware.
Steps to Root Galaxy S3 SGH-I747M Running I747MVLUFNE6 4.4.2 KitKat through Odin:
-
Download CF-Auto-Root for Galaxy S3 I747M and extract the Zip file: CF-Auto-Root-d2can-d2vl-sghi747m.zip
-
Download Odin 3.09 and extract the Zip file: Odin
-
Now, Switch off your phone and boot Galaxy S3 I747M into Download Mode by pressing and holding the Volume Down+Home+Power buttons together (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
-
Run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
-
Now connect your Galaxy S3 I747M to your computer via USB cable
-
In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
-
Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
-
Now, click on the AP button and select the CF-Auto-Root-d2can-d2vl-sghi747m.tar.md5 file.
-
Finally, click on the Start button to begin the rooting process, wait few moments.
-
Once completed, you would see “PASS!” message in ID:COM port having green background
-
Your phone should automatically reboot after completion
-
You can now disconnect your phone from computer
-
Finish
Congrats! You have completed the tutorial to root Galaxy S3 I747M running I747MVLUFNE6 4.4.2 KitKat Firmware. Hope you successfully done the rooting process. If you followed everything as
mentioned in the above tutorial, then your Galaxy S3 I747M should now rooted and
you have complete control over your device. Now, install apps that ask root
permission or flash various custom ROMs. To verify your device is rooted or not, you can
download and run the Root Checker App from Google Play Store. If you have any
doubt or query about the tutorial, feel free to contact with us using the
comment form below, and share your rooting experience with us.
Worked just fine, Thanks.
ReplyDeleteI've rooted my Samsung Galaxy S3 a hundred times before, but this is the first time I've tried rooting the KitKit 4.4.2 version, and for some reason it isn't working! Everything goes smoothly and it supposedly roots, and says "Pass", then reboots the phone as expected, but when I use a root checker utility, it says that the phone isn't rooted.
ReplyDeleteSimilar situation here. Picked up an S3 from Koodo last night. Process says PASS but it isn't rooted. Need root to move my stuff over with Titanium.
DeleteFound an alternate method which appears to have worked.
Deletehttp://www.howardforums.com/showthread.php/1838682-samsung-galaxy-S3-4-4-2-update
i have root acess done to on my SAMSUNG GALAXY SIII SGH I747M (BMC)
ReplyDeletesadly, i did not work for me either. Despite a pass
ReplyDeletemy baseband version is I747MVLUFNF2, will it still work?
ReplyDeletesame based version as yours. didn't work for me. the alt approch---Towelroot, i can't even get to download step...so, as for now, my s3 is still un-rooted.
Deletetried to download Towelroot again by using IE on the phone. was able to instill this APP finally. but my phone "is not currently supported by this APP".
Deletemy phone is I747M with Rogers. 4.4.2, I747MVLUFNF2
I clicked start and nothing happens for almost 10 minutes .. what am I supposed to do now? : (
ReplyDeleteHi, I did the process and all was good, after reboot, the SG3 is still unrooted, any idea? thanks
ReplyDeleteit does not work !!! dont waste your time !
ReplyDeleteHey Nazir, why not remove this till you fix it. No respect for non-working releases.
ReplyDeleteDone with my Rogers S3 4.4.2
ReplyDeleteit didn't work, dont waste your time, more over its slower now
ReplyDeleteThanks! I haven't rooted a phone in a few years, but the samsung 4.4.2 has too many issues and I need to move on to something more reliable. This worked like a charm!
ReplyDeleteDidn't work. I wish I would have read the comments before wasting my time :(
ReplyDeleteplease,
ReplyDeletehow to unlock SGH-1747Mvlufne6
thanks in advance
I think you have to install supersu fater this process is done and then update binary and then it should work
ReplyDelete