N7000XXLSZ Android 4.1.2 JB Firmware for Galaxy Note GT-N7000

Samsung Galaxy Note GT-N7000 Smartphone can now be updated with the latest official XXLSZ Android 4.1.2 Jelly Bean firmware. Samsung recently started rolling out an OTA update about the firmware. The latest firmware build version number is N7000XXLSZ. The Galaxy Note N7000 was released back in the year 2011 with Android 2.3.5 Gingerbread and receiving Android 4.1.2 Jelly Bean from a long. Samsung is yet to release Android 4.2.2 Jelly Bean or later Android version for the device. Samsung already released many firmware update for the device and here we have the latest available firmware for GT-N7000. If you own the device and not yet updated this latest firmware, then update the same using our simple tutorial below. The below guide will help you to download and install the N7000XXLSZ Android 4.1.2 Jelly Bean Firmware manually through Odin.

If your Galaxy Note already running on the Android 4.1.2 Jelly Bean, you can only expect few bug fixes and performance enhancement with this update. So, want to update your Galaxy Note N7000 to the latest XXLSZ Android 4.1.2 Jelly Bean firmware? To install in official way, either you can go for  OTA (over the air) from Settings-About Phone-Software Update or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.1.2 XXLSZ firmware on your Galaxy Note N7000 through Odin.

Important Note:

"The firmware is released only for the Samsung Galaxy Note GT-N7000 model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone".

Android 4.1.2 Jelly Bean N7000XXLSZ Official Firmware Download List

Samsung rolled out the firmware for the folloNoteg countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Note GT-N7000 model.

Germany: N7000XXLSZ_N7000OXALSZ_DBT

France: N7000XXLSZ_N7000XEFLS4_XEF

Italy: N7000XXLSZ_N7000ITVLS4_ITV

Russia: N7000XXLSZ_N7000OXELS7_SER

Poland: N7000XXLSZ_N7000OXXLS4_XEO

[Firmware for rest of the countries and carrier will be added here when available]


  • Check battery percentage, your device should have at least 60% battery power
  • Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
  • Backup important data and settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

  • If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
  • Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
  • After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.1.2 N7000XXLSZ official firmware on Galaxy Note N7000.

How to Install Android 4.1.2 Jelly Bean Official Firmware on Galaxy Note N7000 through Odin:

  1. Download Android 4.1.2 XXLSZ Firmware for Galaxy Note N7000 from the above list
  2. Download Odin 3.07
  3. Switch off your phone and boot Galaxy Note N7000 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
  4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy Note N7000 to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
  9. In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: N7000XXDLJ5_N7000ODDDLI7_INU.tar.md5)
  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your phone should automatically reboot after completion
  13. You can now disconnect your phone from computer
  14. Finish
That's it, you have completed the tutorial to update Android 4.1.2 Jelly Bean official firmware on Galaxy Note GT-N7000. Hope you successfully done the update process. If you followed everything as mentioned in the above tutorial, then your Galaxy Note should now running on the latest Android 4.1.2 Jelly Bean build version XXLSZ. You can confirm the firmware update details from Settings-About Phone. If you stuck in any point or find any issue with the download link, then feel free to contact with us using the comment form below.


Post a Comment